home *** CD-ROM | disk | FTP | other *** search
/ Magnum One / Magnum One (Mid-American Digital) (Disc Manufacturing).iso / d20 / ezstart2.arc / CTRL.ARC / BINKLEY.CFG next >
Text File  |  1990-12-29  |  13KB  |  266 lines

  1. ; ----------------------------------------------------------------------------
  2. ; BINKLEY.CFG - Configuration File for BinkleyTerm 2.40
  3. ; ----------------------------------------------------------------------------
  4. ;
  5. ; ----------------------------------------------------------------------------
  6. ; All configuration options are explained in detail in the Reference 
  7. ; Guide section, "Configuration File."  
  8. ; ----------------------------------------------------------------------------
  9. ;
  10. ; ----------------------------------------------------------------------------
  11. ; The following may apply to all BinkleyTerm installations:
  12. ; ----------------------------------------------------------------------------
  13. ;
  14. ; Port        The desired FOSSIL port to use, normally 1=COM1: and 2=COM2:
  15. ; Baud        Maximum baud rate (300,1200,2400,4800,9600,19200,38400)
  16. ; Carrier     Your carrier mask in hex (usually 80)
  17. ; Init        Initialization string for your modem
  18. ; TermInit    Initialization for terminal mode only operation
  19. ; Prefix      Your modem's dial prefix (ATDT or ATDP)
  20. ; Suffix      Your modem's dial suffix (if you need one, normally not)
  21. ; Busy        What BinkleyTerm sends to the modem while doing other things
  22. ; Answer      Use when modem isn't set to auto-answer, string to send to answer
  23. ; PreDial     Modem string sent before dial string (Prefix) to override default
  24. ; PreInit     Modem string sent before init string (Init) to override default
  25. ; ModemTrans  Dynamic selection of modem prefix and suffix based on nodelist
  26. ; DTRHigh     Leaves DTR (data terminal ready) line "high" on exit
  27. ; Protocol    To use an Opus-CBCS style external protocol for Terminal Mode
  28. ; StatusLog   Path/filename of the desired log file, if any
  29. ; Downloads   Path to put downloaded files into
  30. ; CaptureFile Designates file to use with Alt-L session logging feature
  31. ; LogLevel    Amount of logging desired, 1-5 (1=minimal, 5=maximal)
  32. ; Gong        Gong on successful connection or file transfer in terminal mode
  33. ; Rev3        Forces BinkleyTerm to assume Revision 3 FOSSIL driver
  34. ; SlowModem   Add 1/10th second delay between modem command characters
  35. ; LockBaud    This statement is obsolete - lock your FOSSIL baud rate instead!
  36. ; AutoBaud    Always dial at baud rate listed above instead of nodelist rate
  37. ; TaskView    Tells BinkleyTerm to release time slice on TaskView systems
  38. ; TopView     Tells BinkleyTerm to release time slice on TopView systems
  39. ; MultiLink   Tells BinkleyTerm to release time slice on MultiLink systems
  40. ; Macro       Sends string over the line in Terminal Mode (Alt-F1 thru Alt-F9)
  41. ; Include     Designates name of file with additional configuration statements
  42. ; Application Ignored by BinkleyTerm, may be used by other applications
  43. ; AnswerBack  Sends designated text in response to ENQ char in Terminal Mode
  44. ; PollTries   Number of times BT will dial during a dial or poll
  45. ; SwapDir     Enables shell swapping and designates dir to place swap file
  46. ;
  47. ; ----------------------------------------------------------------------------
  48. ;
  49. Port      {comport}
  50. Baud      {baudrate}
  51. Carrier   80
  52. ; NOTE!  Refer to BT_REF.DOC for dial translation characters
  53. Init      ATE0F1H0M1Q0S7=45S9=10V1X4|
  54. TermInit  ATE1|
  55. Prefix    ATDT
  56. ; Suffix
  57. Busy       v
  58. ; WARNING!  Refer to BT_REF.DOC for details about 'Answer' statement!
  59. ; Answer     ATA|
  60. ; PreDial    `
  61. ; PreInit    |v``^``
  62. ; ModemTrans 1 prefix/suffix     ; HST
  63. ; ModemTrans 2 prefix/suffix     ; PEP
  64. ; ModemTrans 3 prefix/suffix     ; HST or PEP
  65. ; DTRHigh
  66. ; Protocol   {root}\bin\kermit.exe
  67. ; StatusLog    {root}\Binkley.log
  68. Downloads    {root}\In\
  69. CaptureFile  {root}\Capture.Log
  70. ; LogLevel 5
  71. ; Gong
  72. ; Rev3
  73. ; SlowModem
  74. ; LockBaud 4800
  75. AutoBaud
  76. ; TaskView
  77. ; TopView
  78. ; MultiLink
  79. ; NOTE!  In the next statement, Alt-F1 would send "Name" + carriage return 
  80. Macro 1 {firstname} {surname}|
  81. ; NOTE!  In the next statement, Alt-F2 would send "Password" + carriage return
  82. Macro 2 Password|
  83. ; Include suplmnt.cfg
  84. ; Application Amax Direct
  85. AnswerBack {firstname} {surname}|
  86. ; PollTries 10
  87. ; SwapDir f:\ramdisk\
  88. ;
  89. ; ----------------------------------------------------------------------------
  90. ; In addition to the above, if you intend to run BinkleyTerm for point
  91. ; operation or mail interface operation, the following also may apply:
  92. ; ----------------------------------------------------------------------------
  93. ;
  94. ; System        Name of your system (if mail interface, BBS name)
  95. ; Sysop         Your name
  96. ; Address       Your network address, including zone
  97. ; NoZones       Causes zone support to be turned off, as in BT 1.50 and ealier
  98. ; PrivateNet    Designates private network number, used mostly with point nets
  99. ; Boss          Net/Node of your Boss (if NOT a point, then your node address)
  100. ; BossPhone     Phone number for your Boss (override nodelist)
  101. ; BossPwd       Password for use during Boss mail sessions (overrides nodelist)
  102. ; NetMail       Location of your "Matrix" message area
  103. ; NetFile       (Default) Location of your inbound files area
  104. ; KnownInbound  (Known) Location of your inbound files area
  105. ; ProtInbound   (Protected) Location of your inbound files area
  106. ; Hold          Location of your outbound hold area
  107. ; Domain        Define domain name, 8-char abbreviation, nodelist filename
  108. ; Nodelist      Where your system stores its nodelist files
  109. ; NewNodelist   Tells BinkleyTerm to expect "new format" Opus-style nodelist
  110. ; QuickNodelist Use QuickBBS 2.01 nodelist as compiled by ParseLst
  111. ; TBBSList      Use TBBS nodelist as compiled by ParseLst
  112. ; Dial          Dial translation entries (refer to docs for details)
  113. ; ScriptPath    Designates directory to find outward dialing scripts
  114. ; Reader        Command line to invoke reader/editor with Alt-E command
  115. ; Overwrite     Allows overwriting of existing inbound files of the same name
  116. ;                  (ARCmail files excepted)
  117. ; Unattended    Makes BinkleyTerm always start-up in unattended (mailer) mode
  118. ; NoFullScreen  Forces BinkleyTerm to not use the fancy full screen mode
  119. ; BoxType       Designates type of boxes to draw for windowed interface
  120. ; Colors        For windowed interface, gives screen color attributes
  121. ; NOTE!  The winner of our screen colors contest is Mark Kromm of 1:261/1034
  122. ; NOTE!  Mark gets a configuration verb named after him - and here it is!
  123. ; Mark_Kromm    Makes colors 112, 9, 10, 11, 14 and 12
  124. ; ScreenBlank   If used, makes screen blank after 10 minutes of inactivity
  125. ; CursorCol     Gives screen column number for cursor "resting place"
  126. ; CursorRow     Gives screen row number for cursor "resting place"
  127. ; NoSlo         Tells BinkleyTerm not to use SEAlink Overdrive
  128. ; SmallWindow   Reduces "run ahead" during LoTek transfers (for hi-speed modems)
  129. ; Okfile        (Default) List of files okay for file request (for Binkley)
  130. ; Avail         (Default) List of files okay for file request (for humans)
  131. ; About         (Default) Your system's advertisement
  132. ; MaxReq        (Default) Maximum files to be sent during any one f'req session
  133. ; MaxBytes      (Default) Maximum bytes to be sent in one session's freqs
  134. ; KnownReqList  (Known) List of files okay for file request (for Binkley)
  135. ; KnownAvail    (Known) List of files okay for file request (for humans)
  136. ; KnownAbout    (Known) Your system's advertisement
  137. ; KnownReqLim   (Known) Maximum files to be sent during any one f'req session
  138. ; KnownMaxBytes (Known) Maximum bytes to be sent in one session's freqs
  139. ; ProtReqList   (Protected) List of files okay for file request (for Binkley)
  140. ; ProtAvail     (Protected) List of files okay for file request (for humans) 
  141. ; ProtAbout     (Protected) Your system's advertisement
  142. ; ProtReqLim    (Protected) Maximum files to be sent during any one f'req sess
  143. ; ProtMaxBytes  (Protected) Maximum bytes to be sent in one session's freqs
  144. ; NoRequests    Makes your system refuse any and all file requests
  145. ; ReqOnUs       Whether to send inbound F Reqs when you initiate the call
  146. ; ReqTemplate   (Default) Name of request response file template
  147. ; KnownReqTpl   (Known) Name of request response file template
  148. ; ProtReqTpl    (Protected) Name of request response file template
  149. ; NoPickup      Tells BinkleyTerm to send mail during a session and not take any
  150. ; SameRing      For modems that use RING reponse on inbound and outbound calls
  151. ; NoCollide     Disables call collision detection for modems that hate it
  152. ; Shell         DOS Shells...jumps to DOS, issues command (Alt-F1 thru Alt-F9)
  153. ; Timeout       How long to wait for mail before assuming a human caller
  154. ; Banner        Line displayed when someone calls
  155. ; BBSNote       String to send to callers after they press Escape
  156. ; DoingMail     String to send to callers during non-BBS events
  157. ; EnterBBS      String to send to callers to prompt for input to access BBS
  158. ; ExtrnMail     Designates errorlevel exit and string to match for external
  159. ;                  mailer or user-selected BBS functionality
  160. ; MailNote      String to send when external mail handler is being loaded
  161. ; BBS           Type of exit to the BBS to make when someone calls
  162. ; AfterMail     Program or batch file invoked after receiving mail to process
  163. ; Cleanup       Program or batch file invoked once before each scheduled event
  164. ; Packer        Program or batch file invoked once just after 'Cleanup' is run
  165. ; NoWaZOO       Forces BT to be an FSC-only mailer
  166. ; Janusbaud     Baud rate at or below which all sessions could do Janus
  167. ; JanusOK       Modem connect string for Janusbaud exception condition
  168. ; TaskNumber    Arbitary task identifier for use in multitasking situations
  169. ; Flags         Directory in which task identifier is created
  170. ;
  171. ; ----------------------------------------------------------------------------
  172. ;
  173. System    {firstname}'s EZPoint ({zone}:{bossnet}/{bossnode}.{pointnode})
  174. Sysop     {firstname} {surname}
  175. Address   {zone}:{pointnet}/{pointnode}
  176. NoZones
  177. ; PrivateNet 9999
  178. Boss      {bossnet}/{bossnode}
  179. BossPhone {bossphone}
  180. BossPwd   {password}
  181. NetMail   {root}\Msg\
  182. NetFile   {root}\In\
  183. ; KnownInbound {root}\fileknow\
  184. ; ProtInbound  {root}\fileprot\
  185. Hold      {root}\Out\
  186. ;
  187. ; Domain fidonet.org fidonet nodelist
  188. ; Domain alternet.ftn alternet anetlist
  189. ; Domain eggnet.ftn eggnet egglist
  190. ;
  191. ; Nodelist  {root}\
  192. ; NewNodelist
  193. ; QuickNodelist
  194. ; TBBSList
  195. ; Dial 1-404- "GA_PCP.SCR"404/     ; Example of dial translation
  196. ; Dial 1-603-888 888/              ; Example of dial translation
  197. ; ScriptPath {root}\scripts\
  198. ; Reader    EZPoint
  199. ; Editor {Editor}
  200. ; Overwrite
  201. ; Unattended
  202. ; NoFullScreen
  203. BoxType 2
  204. ; Colors 113 30 30 30 31 31 113 15 ; Requires VFOSSIL
  205. Mark_Kromm                         ; Requires VFOSSIL
  206. ; ScreenBlank                      ; Requires VFOSSIL
  207. ; ScreenBlank Call                 ; Requires VFOSSIL
  208. ; CursorCol 1
  209. ; CursorRow 1
  210. ; NoSlo
  211. ; SmallWindow
  212. Okfile     {root}\Request.Lst
  213. Avail      {root}\Private.Doc
  214. About      {root}\Private.Doc
  215. MaxReq     2
  216. MaxBytes   400000
  217. ; KnownReqList  {root}\okfile2.txt
  218. ; KnownAvail    {root}\myfiles2.arc
  219. ; KnownAbout    {root}\mysys2.txt
  220. ; KnownReqLim   5
  221. ; KnownMaxBytes 600000
  222. ; ProtReqList   {root}\okfile3.txt
  223. ; ProtAvail     {root}\myfiles3.arc
  224. ; ProtAbout     {root}\mysys3.txt
  225. ; ProtReqLim    15
  226. ; ProtMaxBytes  1000000
  227. ; NoRequests
  228. ReqOnUs
  229. ; ReqTemplate {root}\sample.tpl
  230. ; KnownReqTpl {root}\known.tpl
  231. ; ProtReqTpl  {root}\prot.tpl
  232. ; NoPickup
  233. ; SameRing
  234. ; NoCollide
  235. ; Shell 1 Sysopus     ; Alt-F1 would send "Sysopus" to COMMAND.COM
  236. ; Shell 2 Amax        ; Alt-F2 would send "Amax" to COMMAND.COM
  237. ; Timeout 20
  238. Banner {firstname}'s EZPoint
  239. ; BBSNote Thank you.  Now loading BBS.  Please wait...
  240. ; DoingMail Sorry, we're not available right now.  Processing mail only.
  241. ; EnterBBS Please press your Escape key to enter the BBS, or wait a few moments.
  242. ; ExtrnMail 140 Gimme UUCP
  243. ; ExtrnMail 150 Gimme WidgetLink
  244. ; MailNote  Now loading UUCP...please wait...
  245. ; BBS Exit
  246. ; BBS Spawn
  247. ; BBS Batch
  248. ; AfterMail   Unpack.Bat
  249. ; CleanUp     Scrub.Bat
  250. ; Packer      Pack.Bat
  251. ; NoWaZOO
  252. ;
  253. Janusbaud 2400
  254. ; JanusOK /Arq/V32
  255. ; JanusOK /V32
  256. ;
  257. ; TaskNumber 1
  258. ; Flags {root}\flags
  259. ;
  260. ; ----------------------------------------------------------------------------
  261. ; Please refer to the documentation for more details on BinkleyTerm set-up...
  262. ; That's why there's documentation included in the package.  
  263. ; ----------------------------------------------------------------------------
  264. ;
  265.  
  266.